With literally hundreds of barrels threaded, we have the
experience to
thread your barrel correctly and on center with the bore. All threading
is done in the lathe with a single point threading tool. We've
come up
with ways to thread barrels that may be too small on the outside
diameter or may be shaped oddly and seem unthreadable such as the
Phoenix Arms HP22. Most any pitch, be it left or right hand, metric or
standard threads can be done. Rifles, shotguns, pistols etc....you name
it, we'll thread it if possible. Fitted thread protectors are
available knurled, smooth or varying combinations of both knurled and
smooth. Bluing of a threaded barrel and thread prootector is available
at an additional cost .
Phoenix Arms HP22 threaded 1/2x28tpi. Note the shape of the barrel and the fact that it was able to be threaded.
Unique model 22 auto pistol threaded 1/2x28.
Single point threading the chamber end of a 700 Remington magnum barrel.
Threading services are as follows. 65.00 to single point thread in the lathe just about any barrel. Thread protectors are an additional 20.00. Photos of the above samples represent a specialized technique we use for "un-threadable" pistols such as the ones shown. This typically runs in the 125.00 range. Some firearms require barrels to be removed from the actions and are priced accordingly.
back
Phoenix Arms HP22 threaded 1/2x28tpi. Note the shape of the barrel and the fact that it was able to be threaded.
Unique model 22 auto pistol threaded 1/2x28.
Single point threading the chamber end of a 700 Remington magnum barrel.
Threading services are as follows. 65.00 to single point thread in the lathe just about any barrel. Thread protectors are an additional 20.00. Photos of the above samples represent a specialized technique we use for "un-threadable" pistols such as the ones shown. This typically runs in the 125.00 range. Some firearms require barrels to be removed from the actions and are priced accordingly.
back